Installing The Developing Unit - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

■ Procedure
1. Remove the screw [1].
• 1 Screw [1]
2. Pull out the Developing Unit [1] to the position in the figure below, disconnect the connector [2], and hook it on the
groove in the Front Inner Upper Cover [3].
• 1 Connector [2]
3. Remove the Developing Unit [1] while lifting it up.

Installing the Developing Unit

1. Unpack the new Developing Unit.
NOTE:
Remove the seal from the supply mouth in step3.
1x
1x
[2] [1]
4. Parts Replacement and Cleaning
[1]
1x
[3]
[1]
203
[2]