Removing The Fixing Drive Unit - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > FX-LW-RL
• COPIER > COUNTER > DRBL-1 > FX-LW-BS
It is also cleared at the same time when FX-UNIT is cleared.

Removing the Fixing Drive Unit

■ Preparation
1. Fully open the Right
2. Remove the Fixing Unit."Removing the Fixing Unit" on page 242
3. Remove the ITB Unit."Removing the ITB Unit" on page 209
4. Remove the Right Cover (Rear Upper) .
5. Remove the Second Delivery
6. Remove the First Delivery
■ Procedure
1. Remove the Air Flow Duct [1].
• 2 Claws [2]
2. Remove the Fixing Drive Assembly [1].
• 3 Screws [2]
• 1 Connector [4]
Door."Fully open the Right Door" on page 154
Unit."Removing the Second Delivery Unit" on page 257
Unit."Removing the First Delivery Unit" on page 255
2x
1x
1x
[3]
[2]
[1]
3x
[2]
248
4. Parts Replacement and Cleaning
[1]