Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1097

14
CAUTION:
Be sure to attach the Ring Cores within 50 mm from the
end of the Speaker Cable.
15
2x
50mm
16
CAUTION:
• Do not cover the Exhaust Outlet with the Cord
Guide.
• Do not affix a Cord Guide on the Reader Cable
Cover.
NOTE:
1. Remove the covers of the 4 Cord Guides, and affix
the Cord Guides to the position as shown in the figure.
2. Fold the Speaker Cable at the [A] part, insert it
through the 4 Cord Guides, and install the 4 Cord
Guide Covers.
4x
■ Routing the Cable (when installing
this equipment and other options
simultaneously)
● For Copy Card Reader and Voice
Guidance
1. Securing the Cable of the Copy Card Reader
1. Remove the covers of the 2 Cord Guides, and affix
the Cord Guides to the position as shown in the
figure.(Use the Cord Guides included with the Copy
Card Reader.)
2. Fold the Card Reader External Relay Cable at the
[A] part, insert it through the 2 Cord Guides, and
install the 2 Cord Guide Covers.
1075
9. Installation
Reader
Cable Cover
[A]
Exhaust
Outlet