Accessing User Tools (System Settings); Changing Default Settings; Quitting User Tools - Ricoh Aficio 2035e Operating Instructions Manual

User Tools (System Settings)

Accessing User Tools (System Settings)

This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.50 "Quitting
User Tools".
4
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Energy
Saver} } } } or { { { { Clear Modes} } } } key is
pressed.

Changing Default Settings

Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press [OK].
See p.60 "Key Operator Code".
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [System Settings].
C C C C
Select the menu, and then press
the appropriate key.
Reference
p.47 "User Tools Menu (System
Settings)"
50
D D D D
Change settings by following in-
structions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to the initial
d i s p l a y , p r e s s t h e { { { { U s e r
Tools/Counter} } } } key.

Quitting User Tools

A A A A
Press the { { { { User Tools/Counter} } } } key.
Note
❒ You can also quit User Tools by
pressing [Exit].
ZCAS100E
ZCAS100E