User Tools; Accessing The User Tools - Ricoh Priport JP5000 Operating Instructions Manual

Accessing The User Tools

This section is for the key operators in
charge of this machine. You can
change or set the machine's default
settings.
A
Press the { { { { User Tools} } } } key.

User Tools

Stamp
Make-Up
Overlay
B
Select the desired user tools
menu. See ⇒ ⇒ ⇒ ⇒ P.135 "User Tools
Menu".
Using the {~}, {}}, {|}, or {{}
key
A Search for the desired user tool
number (1 to 6) with the { { { { ~ ~ ~ ~ } } } } ,
{}}, { { { { | | | | } } } } , or { { { { { { { { } } } } key.
Speed
ow Fast
Image Density
Lighter On Line
Normal
Darker 1
Darker 2
Tint
TPES250N
Clear/S
TPES090N
3. USER TOOLS
Note
[Next]: Press to go to the next
page.
[Prev.]: Press to go back to the
previous page.
B Press the [OK] key.
C Search for the desired user tool
number of each function with
the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key.
D Press the [OK] key.
Using the number keys
A Enter the desired user tool
number (1 to 6) with the Num-
ber keys.
Program Clear Modes
Enter
Clear/Stop
B Press the [OK] or { { { { Enter} } } } key.
C Enter the desired user tool
number of each function with
the Number keys.
D Press the [OK] or { { { { Enter} } } } key.
C
Change the settings by following
the instructions on the panel dis-
play. Then press the [OK] key.
Note
To change the value entered,
press the {Clear/Stop} key before
Auto Cycle
Proof
Print
Start
TPES040N
133