Toro Groundsmaster 4300-D Service Manual page 99

Remote Starter Switch (continued)
Groundsmaster ® 4300-D
16226SL Rev C
g186163
g193733
1. B+ terminal
2. Starter solenoid
After flushing the hydraulic system or replacing a hydraulic component (e.g.,
gear pump, piston pump, or wheel motor), it is necessary to prime the hydraulic
pumps. A remote starter switch
pumps. You can get this switch locally.
When using a remote starter switch, it is highly recommended to
include a 20 A in-line fuse between the battery and switch connector
for circuit protection.
A remote stater switch can also be constructed using the Toro switch #106-2027,
a length of 14 gauge wire, a 20 A in-line fuse, 2 alligator clips, and necessary
Figure 50
Figure 51
3. Starter motor
(Figure 49) can be used for priming the hydraulic
IMPORTANT
Page 4–37 Hydraulic System: Special Tools