Toro Groundsmaster 4300-D Service Manual page 299

Testing the Hydraulic Solenoid Valve Coils (continued)
Groundsmaster ® 4300-D
16226SL Rev C
7. If the solenoid coil testing is correct and a circuit problem still exists, check
the platform wire harness; refer to the Electrical Schematic and Wire Harness
Drawings/Diagrams in
8. After testing the coils, connect the wire harness electrical connector to the
solenoid valve coil.
9. Lower and secure the operator seat if the deck control manifold was
accessed. Install the operator floor plate if the lift control manifold was
accessed.
Appendix A (page A–1).
Page 5–75 Electrical System: Testing the Electrical Components