Toro Groundsmaster 4300-D Service Manual page 195

Installing the Cutting Deck Motor (continued)
Groundsmaster ® 4300-D
16226SL Rev C
5. Lubricate and install new O-rings to the fittings on the deck motor. Use the
labels that you attached during the removal process to correctly connect the
hydraulic hoses to the motor fittings; refer to
and Tube (O-Ring Face Seal Fitting) (page
6. Check the hydraulic-fluid level in the hydraulic tank and add correct quantity
of fluid if necessary; refer to the Operator's Manual.
7. Operate the machine functions slowly until air is out of system; refer to
Charging the Hydraulic System (page 4–94).
Page 4–133
Installing the Hydraulic Hose
4–9).
Hydraulic System: Service and Repairs