Toro Groundsmaster 4300-D Service Manual page 276

Testing the Key Switch (continued)
Electrical System: Testing the Electrical Components
Circuit Logic Table
Switch Position
O
FF
R
UN
S
TART
8. Replace the key switch if testing determines that it is damaged.
9. If the key switch testing is correct and a circuit problem still exists, check
the wire harness; refer to the Electrical Schematic and Wire Harness
Drawings/Diagrams in
10. After you complete the testing, connect the platform wire harness connector
to the key switch.
11. Secure the right control arm cover to the machine; refer to
Control Arm (page
Appendix A (page A–1).
6–24).
Page 5–52
Circuits
None
B+C+F, D+E
A+B+C
Assembling the
Groundsmaster ® 4300-D
16226SL Rev C