Toro Groundsmaster 4300-D Service Manual page 336

Disassembling the Brake
Chassis: Service and Repairs
1. Park the machine on a level surface, lower the cutting decks, shut off the
engine, and remove the key from the key switch.
g185919
1. Hold down pin (2 each)
2. Backing plate
3. Rivet (4 each)
4. Clevis pin
5. Retaining ring
6. Brake shoe (2 each)
7. Shoe spring
g185920
1. Brake shoe
2. Hold down components
3. Shoe spring (actuator)
2. Block the rear wheels with chocks to prevent the machine from moving.
3. Remove the front wheel assembly; refer to
4. Ensure that the parking brake is disengaged.
Figure 207
8. Hold down spring (2 each)
9. Hold down cup (2 each)
10. Shoe spring (actuator)
11. Brake actuator
12. Brake actuator lever
13. Back-up plate
14. Boot
Figure 208
4. Brake actuator
5. Shoe spring
Removing the Wheel (page
Page 6–12
6–6).
Groundsmaster ® 4300-D
16226SL Rev C