Maintenance and Service (continued)
Groundsmaster
®
4300-D
16226SL Rev C
battery cable and then the positive cable. Disconnect the engine wire
harness from the engine ECU. Also, disconnect the wire harness connector
from the machine controller and disconnect the terminal connector from the
alternator, attach the welder ground cable not more than 610 mm (2 ft) from
the welding location.
•
At the time of manufacture, the machine conformed to the safety standards
for riding mowers. To ensure the optimum performance and continued
safety certification of the machine, use genuine Toro replacement parts and
accessories. The replacement parts and accessories of other manufacturers
can result in non-conformance with the safety standards and can void the
warranty.
Page 1–5
Safety: Safety Instructions