Toro Groundsmaster 4300-D Service Manual page 54

Installing the Fuel Tank
Diesel Engine: Service and Repairs
1. Install the fuel tank to the frame
cable ties as recorded during the fuel tank removal.
g188097
1. Fuel sender
2. Fuel supply fitting
2. If the fuel sender was removed from the fuel tank, ensure that the fuel fittings
on the sender are orientated at 90° from right side of the tank as shown in
Figure 15. Torque the fuel sender cap to 20 to 22 N∙m (175 to 200 in-lb) and
ensure that the fuel sender does not turn as the sender cap is tightened.
3. Connect the fuel supply and return (items 17 and 2 in
the fittings on the top of the fuel sender. Secure the fuel hoses with the hose
clamps.
4. Secure the wire harness connector to the fuel sender.
5. Connect the negative battery cable to the negative battery post.
6. Ensure that the fuel tank draincock is closed. Fill the fuel tank with clean fuel.
7. Prime the fuel system; refer to
8. Check the fuel hoses and fittings for leaks.
Note: Repair all fuel leaks before returning the machine to service.
9. Lower the hood and secure it with the latches.
(Figure 14). Secure the fuel hoses with the
Figure 15
3. Fuel return fitting
Priming the Fuel System (page
Page 3–22
Figure 14) hoses to
3–20).
Groundsmaster ® 4300-D
16226SL Rev C