Toro Groundsmaster 4300-D Service Manual page 43

Removing the Air Cleaner System
Installing the Air Cleaner System
Groundsmaster ® 4300-D
16226SL Rev C
Note: Refer to the Operator's Manual for maintenance procedures and intervals
of the air cleaner.
1. Park the machine on a level surface, lower the cutting decks, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Unlatch the hood and raise it.
3. Remove the air cleaner components as shown in
4. Examine the air cleaner assembly (item 5 in
that could cause possible air leaks.
5. Examine the air hoses for wear or damage and replace the hoses if
necessary.
6. Examine the hood seals for wear or damage and replace the seals if
necessary.
g188093
1. Air cleaner assembly
2. Vacuator valve
3. Adapter
Leaks in the air filter system will allow dirt to enter into the engine
and can cause serious engine damage. Ensure that all the air cleaner
components are in good condition and are properly secured during
installation.
Figure 10
4. Service indicator
5. Groove
6. Filter element
IMPORTANT
Page 3–11
Figure 9.
Figure 9) for wear or damage
Diesel Engine: Service and Repairs