Toro Groundsmaster 4300-D Service Manual page 193

Removing the Cutting Deck Motor
Groundsmaster ® 4300-D
16226SL Rev C
g186181
1. Park the machine on a level surface, lower the cutting decks, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Read the General Precautions for Removing and Installing the Hydraulic
System Components (page
3. For assembly purposes, label all the hydraulic connections. Clean the
hydraulic connections before loosening the hydraulic lines from the deck
motor.
Before opening the hydraulic system, operate all the hydraulic
controls to release system pressure and avoid injury from the
pressurized hydraulic fluid; refer to
Hydraulic System (page
g186176
1. Cutting deck
2. Hydraulic motor
Figure 101
4–87).
CAUTION
Releasing Pressure from the
4–6).
Figure 102
3. Socket-head screw
4. Flat washer
Page 4–131 Hydraulic System: Service and Repairs