Toro Groundsmaster 4300-D Service Manual page 354

Installing the Mechanical Seat Suspension
Chassis: Service and Repairs
1. Install all the seat suspension components that were removed
and Figure 219). If removed, use the seat adjuster mounting holes that were
recorded during removal.
Do not damage the electrical harness when installing the seat
suspension to the machine.
2. Position the seat base cover and 4 spacers (item 7 in
seat frame.
3. Use the mounting holes that were recorded during removal, position the seat
suspension to the seat frame and secure with the 4 flange-head screws (item
4 in Figure 219) and 4 flange nuts.
4. Install the seat to the machine; refer to
6–27). Ensure to connect the harness electrical connector to the seat switch.
IMPORTANT
Installing the Operator Seat (page
Page 6–30
(Figure 218
Figure 219) to the
Groundsmaster ® 4300-D
16226SL Rev C