Toro Groundsmaster 4300-D Service Manual page 175

Installing the Front Wheel Motor (continued)
Groundsmaster ® 4300-D
16226SL Rev C
11. Install the front wheel to the machine; refer to
12. Lower the machine to the ground.
13. Torque the locknut (item 13 in
14. Operate the machine functions slowly until air is out of system; refer to
Charging the Hydraulic System (page
15. Start the engine, check for hydraulic-fluid leaks, repair any leaks as required,
and fill the hydraulic tank with the correct quantity of new hydraulic fluid
before returning the machine to service.
Figure 91) to 427 to 521 N∙m (315 to 385 ft-lb).
4–94).
Page 4–113
Installing the Wheel (page
Hydraulic System: Service and Repairs
6–6).