Toro Groundsmaster 4300-D Service Manual page 214

Removing the Steering Control Valve (continued)
Hydraulic System: Service and Repairs
g193311
10. Disconnect the hydraulic lines from the steering control valve. Allow the
lines to drain into a suitable container.
11. Install clean caps or plugs on the hydraulic lines and fittings to prevent
contamination.
12. Loosen and remove the remaining 2 socket-head screws and 2 flange nuts
that secure the steering column to the machine.
13. Remove the steering column and steering control valve assembly from the
machine.
14. Loosen and remove the 4 socket-head screws that secure the steering
control valve to the steering column.
15. Remove the steering control valve from the steering column.
Figure 117
Page 4–152 Groundsmaster ® 4300-D
16226SL Rev C