Toro Groundsmaster 4300-D Service Manual page 362

Removing the Hood
Installing the Hood
Chassis: Service and Repairs
1. Park the machine on a level surface, lower the cutting decks, shut off the
engine, and remove the key from the key switch.
2. Unlatch the hood.
3. Remove the bow tie pins (item 7 in
removal.
4. Lift the hood assembly from the machine.
5. Remove the hood components as necessary
1. Install all the hood components that were removed
2. Position the hood assembly to the machine.
3. Install the clevis pins (item 8 in
4. Latch the hood.
Figure 224) and clevis pins to allow hood
Figure 224) and secure with the bow tie pins.
Page 6–38
(Figure 224).
(Figure 224).
Groundsmaster
16226SL Rev C
® 4300-D