Upgrade Error Codes And Recommended Actions - IBM Storwize V7000 Unified Problem Determination Manual

Table 119. Upgrade error codes from using the applysoftware command and recommended
actions (continued)
Error Code
EFSSG4159I
EFSSG4160
EFSSA0201C
General upgrade error codes and recommended actions
If any errors are posted during the upgrade process, see Table 120 and take the
described course of action. If the error you see is not listed in this table, call the
IBM Support Center. Follow these guidelines:
1. Follow the actions in the order presented.
2. After each recommended fix, restart the upgrade by issuing the applysoftware
command again. If the action fails, try the next recommended action.
3. If the recommended actions fail to resolve the issue, call the IBM Support
Center.
Table 120. Upgrade error codes and recommended actions
Error
Code Explanation
018C Unable to determine active
management node.
018E Internal error - cluster or node not
provided.
019A Yum update failed.
019B Unable to remove StartBackupTSM
task.
019C Unable to determine active
management node.
The applysoftware
command explanation
The applysoftware command
returned that the system is in
an unhealthy state and
upgrade cannot start.
The system has insufficient
file system space.
The license agreement has
not been accepted.
Action
1. Check to see if management service is
running on active node. If it is not
use startmgtsrv to start.
2. Contact IBM Remote Technical
Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
1. Check to see if management service is
running on active node. If it is not,
use startmgtsrv to start.
2. Contact IBM Remote Technical
Support.
1. Check to see if management service is
running on active node. If it is not
use startmgtsrv to start.
2. Contact IBM Remote Technical
Support.
Action
At least 3 GB of space is
required. Remove unneeded
files from the /var file
system.
Chapter 7. Recovery procedures
419