IBM Storwize V7000 Unified Problem Determination Manual page 179

About this task
To remove the DVD drive, complete the following steps.
Procedure
1. Read the Safety information and "Installation guidelines" on page 94.
2. Follow the procedure in "Removing a file module and disconnecting power"
on page 92 to suspend the file module from the cluster and shut it down, and
then disconnect all power cords and external cables.
3. Slide the file module out of the rack, and then remove the cover (see
"Removing the cover" on page 123).
4. Press the release tab down to release the drive; then, while you press the tab,
push the drive toward the front of the file module.
5. From the front of the file module, pull the drive out of the bay.
Drive retention clip
Alignment pins
Release tab
Chapter 4. File module
151