Removing The Host Interface Adapter - IBM Storwize V7000 Unified Problem Determination Manual

Figure 117. Removing the host interface adapter
372
Storwize V7000 Unified: Problem Determination Guide 2073-720
1
6. Remove the replacement host interface adapter 1 from its package.
Figure 118 on page 373 displays installing the host interface adapter.
7. Set the connecting edge of the replacement host interface adapter 3 on the
host interface adapter connector so that the connectors are aligned.
8. Ensure that the adapter is perpendicular to the canister main board so that the
small tab on the top of the bracket 2 is aligned with the alignment hole in
the top edge of the slot.
9. Maintain alignment while applying pressure to the top edge of the host
interface adapter opposite the connecting edge to push the host interface
adapter into the connector 4 and 5 .
2