Right-Side Enclosure Screws; Left-Side Enclosure Screws - IBM Storwize V7000 Unified Problem Determination Manual

16. Turn the enclosure over again so that the top of the enclosure is facing
17. Remove the three screws and one screw-pin on the right side that secure the
Figure 105. Right-side enclosure screws
18. Remove the three screws and one screw-pin on the left side that secure the
Figure 106. Left-side enclosure screws
19. Remove the midplane assembly from the chassis by rotating up the midplane
356
Storwize V7000 Unified: Problem Determination Guide 2073-720
upward and the front is facing towards you.
midplane assembly to the enclosure. Label each screw to indicate the removal
location and place the screws aside. Figure 105 illustrates the location of the
screws and screw-pin on the right-side of the enclosure.
midplane assembly to the enclosure. Label each screw to indicate the removal
location and place the screws aside. Figure 106 illustrates the location of the
screws and screw-pin on the left-side of the enclosure.
assembly to about 45°, then withdraw the midplane assembly from the front
of the enclosure. Figure 107 on page 357 shows the midplane assembly at a 45
degree angle.