Removing The Battery - IBM Storwize V7000 Unified Problem Determination Manual

Battery
Figure 57. Removing the battery
9. Dispose of the battery as required by local ordinances or regulations. For more
Battery return program: This product may contain sealed lead acid, nickel
cadmium, nickel metal hydride, lithium, or lithium ion battery. Consult your user
manual or service manual for specific battery information. The battery must be
recycled or disposed of properly. Recycling facilities may not be available in your
area. For information on disposal of batteries outside the United States, go to
www.ibm.com/ibm/environment/products/index.shtml or contact your local
waste disposal facility.
In the United States, IBM has established a return process for reuse, recycling, or
proper disposal of used IBM sealed lead acid, nickel cadmium, nickel metal
hydride, and other battery packs from IBM Equipment. For information on proper
disposal of these batteries, contact IBM at 1-800-426-4333. Please have the IBM part
number listed on the battery available prior to your call.
The following applies for countries within the European Union:
Attention: You must not tilt or push the battery by using excessive force.
c. Use your thumb and index finger to lift the battery from the socket.
Attention: Do not lift the battery by using excessive force. Failing to remove
the battery properly might damage the socket on the system board. Any
damage to the socket might require replacing the system board.
information, see the IBM Environmental Notices and User's Guide on the IBM
Documentation CD.
133
Chapter 4. File module