Unlocking And Removing A 3.5-Inch Drive From Its Slot; Installing And Locking A 3.5-Inch Drive Into Its Slot - IBM Storwize V7000 Unified Problem Determination Manual

15. Gently push the drive assembly into the bay until the drive stops.
16. Rotate its handle to the closed (locked) position.
Figure 94. Unlocking and removing a 3.5-inch drive from its slot
Figure 95. Installing and locking a 3.5-inch drive into its slot
Results
If the replaced drive was a failed drive, the system automatically reconfigures the
replacement drive as a spare and the replaced drive is removed from the
configuration. The process can take a few minutes.
Replacing a 3.5-inch drive assembly or blank carrier
This topic describes how to replace a 3.5-inch drive assembly or blank carrier.
322
Storwize V7000 Unified: Problem Determination Guide 2073-720