Table of Contents
Advertisement
(2) Method to create the cycle-sewing data
A
C
F
H
1 Displaying the data entry screen
Only on the data entry screen (pink), the cycle-sewing data
number can be selected. On the sewing screen (green), press
the set ready key
ince no pattern number is registered in the initial screen, the
first pattern selection button is displayed in the blank state.
2 Displaying the pattern number selection screen
When you press pattern selection
ber selection screen is displayed.
3 Selecting a pattern number
Every time you press up/down scroll buttons
the registered pattern number button C changes over one
after another.
E
It is also possible to bring up the pattern number entry screen
D
with number input button
tern number.
B
The button displays the description of the pattern data.
Now, press pattern No. button you want to select.
4 Confirming the pattern number
When you press enter button
selection screen is closed to finish selection.
5 Repeating steps of procedure 2 through 4 by the num-
ber of patterns you want to register
Once the first registration is confirmed, the 2nd pattern selec-
tion button
Repeat steps of procedure 2 through 4 by the number of
patterns you want to register.
You can select the pattern No. button by pressing up/down
scroll buttons
I
displayed in pink
When you press pattern No. button H shown on the display, the
belt-loop pattern data entry screen is displayed. On this screen,
you can set each parameter of the pattern data separately.
G
�@-2-6. How to change the belt loop length�,
→ Refer to
p.38
for details.
When the combined data you have created requires several
screens, you can display the next screen with screen scroll
button
I
– 75 –
to display the data entry screen (pink).
D and directly enter the pat-
E , the pattern number
F will be displayed.
G . The selected patter No. button is
.
.
A , the pattern num-
B ,
Advertisement
Table of Contents
