5. ADjUSTING THE mACHINE HEAD
(DIRECT-DRIVE mOTOR TYPE SEWING mACHINE ONLY)
WARNING :
Be sure to perform the angle adjustment of the machine head by the operation below before using
the machine head.
1
A
4
) Smultaneously pressng swtch 1 and swtch 2 ,
2
2)
B
3) Turn the handwheel by hand and angle B s ds-
4) In ths state, algn the whte dot 2 of the hand-
3
2
5) Press swtch 4 to finish the adjustment work.
- 3 -
turn ON the power swtch.
s dsplayed A n the ndcator and the
mode s changed over to the adjustment mode.
played n the ndcator when the reference sgnal
has been detected.
(The value s the reference value.)
wheel wth the concave 3 of the handwheel
cover as shown in the figure.
(The value s the reference value.)