E-43A Functions Menu; Figure 8: E-43A Functions Menu - EFI E-43A Installation And Service Manual

U E-43A
SING THE

E-43A Functions menu

The following options are available from the E-43A Functions menu:
• Allows you to transfer any options stored in the hard disk drive of the
MB Replacement:
E-43A into a new motherboard.
The MB Replacement option appears only when you insert the motherboard
N :
OTE
replacement dongle into a USB port.
• Allows you to eject media from the DVD drive. Media is also automatically
Eject CD/DVD:
ejected whenever the E-43A is restarted, shut down, or rebooted. A hardware eject button
is also located below the disc slot.
• Displays the current IP address of the E-43A.
IP Address:
• Includes options to Restart (soft reset) or Reboot (hard reset) the E-43A.
Restart Server:
Selecting Restart resets the E-43A server software, but does not reboot the entire system.
Selecting Reboot shuts down all E-43A activity and reboots the system. When you select
Restart or Reboot, network access to the E-43A is temporarily interrupted and all currently
processing jobs are aborted and may be lost.
• Shuts down all E-43A server software and powers off the system. Always
Shut Down Server:
select this option to power off the system.
Eject CD/DVD
IP Address
Restart Server
Shut Down System
Server name
F 8: E-43A Functions menu
IGURE
Avoid using the reset button on the front panel, as doing so may cause the system to
N :
OTE
operate unpredictably. Use the reset button on the front of the E-43A only if the system is
unresponsive to keyboard or mouse actions (if available).
27