EFI E-43A Installation And Service Manual page 34

U E-43A
SING THE
2 If the logo screen is displayed, press the Menu button once to display the Functions menu.
Menu button
3 Make a selection:
• To restart or reboot the E-43A, select Restart Server. A submenu displays allowing you to
select Restart Server, Reboot System, or Cancel.
• To shut down the E-43A immediately, select Shut Down System.
Eject CD/DVD
IP Address
Restart Server
Shut Down System
Server name
Use the reset button on the front of the E-43A only if the system is unresponsive to
N :
OTE
keyboard or mouse actions (if available).
Allow the system to shut down and power off or restart.
If you selected Restart Server, you may need to wait 1 minute or more for the server software
to restart.
Before accessing internal components following a shutdown, make sure that all cables are
disconnected from the back of the E-43A.
T , ,
O SHUT DOWN RESTART OR REBOOT FROM THE COPIER
N : Notify the site administrator before you remove the E-43A from the network.
OTE
1 Make sure that the E-43A is not receiving, processing, or printing any jobs.
If Printing appears on the control panel, the E-43A is processing. You must wait until the
system finishes and reaches Idle before restarting or shutting down.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
2 Press Home button on the copier/printer operational panel.
Server name
This logo screen indicates that the E-43A is Idle.
Displays a submenu
Immediately shuts down
the E-43A
/
PRINTER TOUCH PANEL
Restart Server
Reboot System
Cancel
Server Name
34