Figure 29: Removing/Replacing The Hard Disk Drive Bracket - EFI E-43A Installation And Service Manual

Tension
points
Printer interface
N :
OTE
board and internal cables
are not shown.
R
EPLACING PARTS
N : You will encounter slight resistance as you slide the bracket off the shelf. The resistance
OTE
is caused by two tension points on the bottom of the bracket. The resistance helps control the
bracket's movement during removal and installation.
Removing/replacing the hard disk drive bracket
F 29:
IGURE
77
Latch
Hard disk
drive bracket
Shelf
Screw