Opening The E-43A - EFI E-43A Installation And Service Manual

Color controller
Table of Contents

Advertisement

R
EPLACING PARTS

Opening the E-43A

To service internal components, open the E-43A as described in the following procedure.
• The E-43A weighs approximately 20Kg. Be careful when moving the device.
• Never lift the E-43A by grasping the top panel. The top panel does not support the weight of
the system.
Ne jamais soulever le serveur d'impression par sa partie supérieure : celle-ci ne peut pas supporter le
A
:
VERTISSEMENT
poids du système.
Il server di stampa non deve essere mai sollevato afferrandolo dal pannello superiore, in quanto
A
:
VVERTENZA
quest'ultimo non può sostenere il peso dell'intero sistema.
Heben Sie den Druckserver nicht an der oberen Gehäuseabdeckung an. Die obere Gehäuseabdeckung ist
W
:
ARNUNG
nicht dafür ausgelegt, das Gesamtgewicht des Systems zu tragen.
A
:
No levante nunca el servidor de impresión agarrándolo por el panel superior. El panel superior no
DVERTENCIA
soporta el peso del sistema.
Nunca erga o servidor de impressão pelo painel superior. O painel superior não suporta o peso do sistema.
A
:
VISO
Til de afdrukserver nooit op door het bovenpaneel vast te nemen. Het bovenpaneel kan het gewicht
W
:
AARSCHUWING
van het systeem niet dragen.
T
E-43A
O OPEN THE
1 Shut down the E-43A (see
2 Remove all cables from the back of the E-43A.
3 Remove the E-43A from the furniture (see
4 Remove all panels necessary to access the component that you need to service.
For guidelines on which panels to remove, see the service procedure for the component that
you want to access.
N
:
When removing multiple panels from the E-43A, use the following order:
OTE
• Left panel (see
• Right panel (see
• Front panel (see
• Top panel (see
N
:
When replacing panels, reverse the order.
OTE
5 Place the E-43A on a flat surface. Attach an ESD wrist strap before handling internal parts
(see
page
11).
6 Carefully position the E-43A so that it is resting on its side and the internal components are
facing up.
Place removed components on a grounded, antistatic surface.
page
43).
page
page
45)
page
45)
page
46)
page
47)
45).
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents