Figure 33: Removing/Replacing The Switch Bank Assembly - EFI E-43A Installation And Service Manual

R
EPLACING PARTS
6 Remove the switch bank assembly from the component sled.
• Remove the three screws that attach the switch bank assembly to the component sled.
• Pull the switch bank assembly straight out of the component sled.
F 33: Removing/replacing the switch bank assembly
IGURE
Guide the cables as you remove the assembly from the component sled. Be careful not
N :
OTE
to damage the EMI gasket around the opening in the component sled.
7 If you are removing the switch bank assembly to replace it with a new assembly, remove the
DVD drive (see page 84).
82
Component sled
Switch bank assembly
Screw (1 of 3)