Figure 34: Removing/Replacing The Dvd Drive - EFI E-43A Installation And Service Manual

R
EPLACING PARTS
Screw
(1 of 2)
F 34:
IGURE
T DVD
O REPLACE THE
1 Install the DVD drive in the switch bank assembly.
2 Install the switch bank assembly in the component sled, and then install the component sled
in the chassis (see
3 Attach the power and data combination cable to the back of the DVD drive.
4 If you installed a new DVD drive, make sure to reset the time and date in Setup (see
Configure Help for more information).
5 Reassemble the E-43A and verify its functionality (see
Removing/replacing the DVD drive
DRIVE
page 83).
DVD drive
Switch bank assembly
page 86).
85