User Interface Board Assembly; Figure 19: J102 Connector On The Printer Interface Board - EFI E-43A Installation And Service Manual

R
EPLACING PARTS
2 Connect the power/reset button cables from the front panel to the J102 connector.
(Green) (Blue)
J102 connector on the printer interface board
F 19:
IGURE
3 Connect the 10-pin power button cable from the FPIO_1 connector to the J103 connector
(see Figure 14 on page
4 Reassemble the E-43A and verify its functionality (see

User interface board assembly

The user interface board (UIB) provides the interface between the E-43A and the user. The
front of the UIB contains circuitry for the following:
• Activity lights (amber, green, and red LEDs)
• Display window (LCD)
• Four line selection buttons
• Up and Down buttons
• Menu button
• Jewel lights
The buttons are not included in the user interface board spare kit.
N :
OTE
43).
page 86).
50