Fiery Tab - EFI E-43A Installation And Service Manual

U
SING THE

Fiery tab

The Fiery tab provides access to many of the same features available through Command
WorkStation.
Fiery Info Displays information about the current configuration of the E-43A.
Printable Info Allows you to print these system pages from the E-43A:
PS Test Page/PCL Test Page:
printer, and provides color and grayscale samples to troubleshoot problems with the copier/
printer or the E-43A. Settings on the Test Page may include: Server Name, color settings,
printer model, and date and time the Test Page was printed.
PS Font List/PCL Font List:
Configuration:
of the E-43A, the current settings for Setup, the current calibration, the IP address of the
E-43A, and a log of system updates.
Color Charts:
E-43A.
Custom Paper Instructions:
Calibration Instructions:
Job Log:
E-mail Log:
FTP Log:
N :
OTE
Setup Enter the Setup menu and change Setup option settings.
Clear Job Log Clears the job log from the E-43A.
Run Diagnostics To troubleshoot printer interface board, choose this menu.
Clear Server Clear all jobs in all server queues, as well as all jobs archived on the E-43A hard disk drive,
the index of archived jobs (in the Archive window), all FreeForm masters, and the index of
FreeForm masters (in the FreeForm window). Consult with your administrator or operator
before choosing Clear Server.
E-43A
Confirms that the E-43A is properly connected to the copier/
Prints a list of all fonts currently on the E-43A hard disk drive.
Provides general information about the hardware and software configuration
Prints samples of the RGB, CMY, and PANTONE colors available from the
Provides the instructions for setting up custom paper entry.
Prints the information on how to perform the calibration.
Prints a log of the last 55 jobs.
Prints a log listing recent e-mail activity.
Prints a log listing recent FTP activity.
To print the E-mail or FTP log, you must first enable the appropriate service.
30