Table of Contents
Advertisement
03/2006
11.10
Installing a replacement hard disk
PCU 50/70
The next section describes how to restore the data back-ups of an entire
PCU 50/70 hard disk so that both user and system data remains available and
consistent if servicing is required.
R
Norton Ghost
Using the "Norton Ghost
disk is stored as a disk image with HMI Advanced. This disk image file can be
stored on various data carriers for later restoration of the hard disk.
Norton Ghost
spare hard disk.
For further information please see web site "www.ghost.com" or the previous
chapter.
Recommendation
Archive the hard disk back-up (image), including the "Norton Ghost" program,
on a CD.
Restore back-up
Requirement:
copy
S
S
S
S
É É É É
É É É É
É É É É
É É É É
1. Fit the new spare hard disk in the PCU 50/70
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
R
" software, the entire content of a PCU 50/70 hard
R
is supplied from the factory on every PCU 50/70 module and the
Ghost program is installed on the PG.
A new replacement hard disk is installed.
Connect the PCU to the PC/PG using a parallel cable
One of the operating systems Windows 3.x, Windows 95 and a CD drive is
available on the PC/PG.
LPT:
(X8)
PCU 50/70/
HMI Advanced
(see enclosed instructions)
– Place hard disk onto hinges
– Plug in the connecting cable from the hard disk to PCU
– Mount hard disk using the 4 knurled screws
– Release the transport retainer: turn to "operating" until it engages.
11.10 Installing a replacement hard disk
À À À À
À À À À
LPT:
À À À À
À À À À
PG/PC
11 Data Back-Up
CD
11-253
11
Advertisement
Table of Contents
