Workpiece Management On Hard Disk - Siemens SINUMERIK 840C Operator's Manual

6 Programming
CYD
Status
6.2.2

Workpiece management on hard disk

© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
The CYD entry shows you the current status of the cycle disable:
• CYD on (set)
• CYD off (deleted)
Cycles in the NCK memory can only be loaded in the editor when the cycle
disable is off. The behaviour of cycles on the MMC side can be planned
separately by the machine manufacturer.
The read/write rights in the status line of the data management are displayed
according to the position of the focus and disables or releases planned by the
machine manufacturer.
• The focus marks the combo box:
- Write right if you may copy in the directory selected.
- Read right if the edit function is allowed for individual files of the
directory selected.
- In all other cases, no rights are dissplayed.
• The focus marks the list field:
- Write right if the selected file may be deleted.
- Read right if the selected file may be edited.
- In all other cases, no rights are displayed.
Machine manufacturer
The files are displayed together with the date in the left-hand list box in the
data manager.
The date display can be configured by the machine manufacturer.
The SINUMERIK 840C data manager provides convenient functions for
simple and efficient management of workpieces and their files. This section
describes how to perform the following tasks:
• Create workpieces and their related files and store them on the hard disk.
• Perform data management tasks, such as copying, deletion and duplication
of data on the hard disk.
• Edit part programs, job lists, R parameters, setting data, cycle setting data,
zero offsets and tool offsets with the aid of the WEdit editor.
6FC5198-6AA60-0BP1
01.99
6-7