10 Drive Optimization
10.7 Trace function
10.7.1
Main screen
Main screen
Servo trace
10.7.2
Programming and activating measurements
Programming
on the main screen
Signal selection
Input box
Axis/spindle name
10-198
The main screen for the trace function is accessed using the
Drives/Servo \ Servo trace soft keys.
Fig. 10-9
Basic servo trace screen
The main screen is used to select
S
The axis/spindle to be measured
S
The signal to be measured
S
The measuring duration
S
Trigger time
S
Trigger type
S
Trigger threshold
The cursor must be positioned on the "Axis/spindle name" list box for the trace
concerned. The selection is then made by using the Axis+ and Axis– soft keys
or by activating the desired item in the drop-down list box.
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006