Siemens SINUMERIK 840D Simodrive 611 digital Startup Manual page 172

9 Axis/Spindle Dry Run
9.1 Requirements
Limit switch
9-172
Reference material: /FB1/ A2, Function Guide,
Setting of hardware limit switches and interface signal check:
S
Hardware limit switch PLUS
S
Hardware limit switch MINUS
Reference material: /FB1/ A3, Function Guide
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Various NC/PLC interface signals and functions
Section: Interface signals from and at axis/spindle
DB31–61.DBX12.1
DB31–61.DBX12.0
Axis monitoring, protection areas,
Section: Monitoring of static limits
© Siemens AG 2006 All Rights Reserved
03/2006