Table of Contents
Advertisement
11 Data Back-Up
11.8 Backing up the hard disk with Norton GhostR
11-250
* When you select this menu, a message appears:
You are prompted to check whether a connection has been
established between the HMI and PG/PC.
The destination path for the HMI image directory is displayed.
The back-up is to be generated from this directory.
* PG/PC:
Start the Ghost program in a DOS window or at the DOS level
using the command ghost –lps.
* PCU:
Click on "Y" to acknowledge the prompt and start the back-up.
* PCU:
A Norton Ghost message window appears. This contains:
The transfer progress
The paths used
Information about the amount of data to be transferred
PCU
If the back-up is canceled, a prompt appears:
Do you want to try to back-up again [Y,N] ?
Click on N to acknowledge and call up the main menu.
Click on "Y" to restart the back-up.
–
< 4 > Back to previous menu
Return to main menu
8. The system boots automatically after a successful restore operation.
Duration:
approx. 15–20 minutes
Note
Back-up of user data, machine data and start-up files is an integral feature of
the HMI in the Services operating area.
The storage location and format of the data to be saved, and the medium on
which they can be stored or restored from, are displayed in the File Manager.
Reference material:
/IAM/ IM4, HMI AdvancedStart-up Guide
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006
Advertisement
Table of Contents
