Siemens SINUMERIK 840D Simodrive 611 digital Startup Manual page 50

6 Programming the control
6.1 Machine and setting data
Entering machine
data
Bit editor for HEX
machine data
6-50
Table 6-1 Overview of machine and setting data, continued
Area
from 30000 to 38999
from 39000 to 39999
from 41000 to 41999
from 42000 to 42999
from 43000 to 43999
from 51000 to 61999
from 62000 to 62999
from 63000 to 63999
Menus are provided for entering the machine data. How to select displays:
Press the "MENÜ SELECT" button: The menu bar with the following areas ap-
pears on screen: Machine, Parameters, Program, Services, Diagnostics and
Start-Up.
Press the "Start-up" soft key and the "Machine data" soft key.
A bit editor is implemented for setting certain machine data bits. If the input cur-
sor in the MD list is on a machine data item in HEX format, the editor can be
called up by pressing the Toggle key.
Note
The bit editor for HEX machine data is only available in conjunction with the
HMI.
Fig. 6-1 Input screen in the bit editor for HEX machine data
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Designation
Axis-specific machine data
Reserved
General setting data
Channel-specific data
Axis-specific setting data
General machine data for compile cycles
Channel-specific machine data for compile cycles
Axis-specific machine data for compile cycles
© Siemens AG 2006 All Rights Reserved
03/2006