Table of Contents
Advertisement
3 Settings, MPI/BTSS
3.4
MPI default configuration for SINUMERIK 810D
3.4
MPI default configuration for SINUMERIK 810D
Standard
application
Hardware
requirements
STEP7
MPI baud rate
Bus addresses
PCU
1
X122
Fig. 3-7
Standard application for SINUMERIK 810D
3-28
Example:
GD circuits 1 and 2 are assigned by "Communication Configuration" as a result
of the PLC–PLC cross-communication. A first MSTT on the MPI can then be
assigned to GD circuit 3 (bus address 9 or 10), and a second MSTT on the MPI
to GD circuit 4 (bus address 7 or 8).
SINUMERIK 810D with PCU and one machine control panel (MSTT) or inter-
face for customer's operating panel
At least firmware release V 03_01_01 for
S
MCP
S
interface for customer's operating panel
from version 2.x
All MPI bus nodes operate at 187.5 kbaud.
Every node on the MPI bus must have a bus address (0...15).
PG/start-up tool
0
SINUMERIK 810D
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Bus addresses
MSTT/interface for
customer's operating panel
PLC
2
3
NCK
© Siemens AG 2006 All Rights Reserved
03/2006
MPI bus
187.5 kbaud
14
Advertisement
Table of Contents
