Table of Contents
Advertisement
6 Programming the control
6.9
Axes and spindles
6-126
MD 36300 ENC_FREQ_LIMIT
MD 36200 AX_VELO_LIMIT
MD 35100 SPIND_VELO_LIMIT
MD 35130 GEAR_STEP_MAX_VELO_LIMIT
MD 35110 GEAR_STEP_MAX_VELO
Programmable spindle speed limitation G26
Programmable spindle speed limitation G92
Programmable spindle speed limitation G25
MD 35120 GEAR_STEP_MIN_VELO
MD 35140 GEAR_STEP_MIN_VELO_LIMIT
MD 36060 STANDSTILL_VELO_TOL
NST "Axis/spindle stationary" (DB31, ... DBX61.4)
Spindle speed range
Speed range of active gear step
Speed range limited by G25 and G26
Speed range for constant cutting velocity by G92
NST "Referenced/synchronized" (DB31, ... DBX60.4/60.5)
Actual speed monitoring
Maximum spindle speed
Fig. 6-23
Areas for spindle monitoring
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006
Speed
n
Advertisement
Table of Contents
