Siemens SINUMERIK 840D Simodrive 611 digital Startup Manual page 134

6 Programming the control
6.10 Linear motors (1FN1 and 1FN3 motors)
6-134
b) Is the linear motor not included in the list of linear motors?
––> "Non-Siemens motor"
"Motor" field ––> enter data
Note
If a smaller identification current is needed (<40%), alarm 300753 must be
hidden with bit 5 in MD 1012.
Fig. 6-27 Entering the unlisted motor, the data is not yet specified
Enter the motor data:
Fig. 6-28 Entering data for an "unlisted motor"
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006