Table of Contents
Advertisement
10 Drive Optimization
10.6 Graphical display
10.6
Graphical display
Explanation
X marker and
Y marker On/Off
soft keys
2nd marker X and
2nd marker
Y zoom and full
screen soft keys
Scale...
10-194
All the axes are on a 1-axis module. All the axes of the interconnected coupling
are displayed. No more than one leading axis and two synchronizing axes are
ever visible. Nevertheless, all the axes can be used for navigation.
The graph is displayed by pressing the Display soft key in the main screen for
the measuring function.
Fig. 10-6
Display diagrams 1 and 2 of speed control loop
These soft keys are used to display a vertical or horizontal line representing the
abscissa or ordinate in the selected diagram. The associated coordinates are
also output. The soft key X marker or Y marker must be selected again in order
to deselect the markers. The markers are moved by means of the cursor keys.
A 2nd X marker or 2nd Y marker may be overlaid in order to highlight differen-
ces. The absolute position of the selected cursor and the delta values between
the relevant cursor lines are thus highlighted.
The "Zoom" soft key can be used to gradually increase the area between the
cursors. Use the Select button to change cursor.
The "Full screen" soft key is used to return to the optimum representation.
Scaling is normally automatic. The Scale soft key can also be used to manually
set the scaling for the individual traces.
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
© Siemens AG 2006 All Rights Reserved
03/2006
Advertisement
Table of Contents
