Table of Contents
Advertisement
6 Programming the control
6.4
Display filter for machine data
Activating group
filters via
checkboxes
Vertical soft keys
6-62
Table 6-9
Display criteria
Display filter active
Expert mode
Group filters
All others
Index from to
The checkboxes are selected using the cursor keys and are checked/
unchecked with the toggle key.
S
If a filter is disabled (not checked), then the corresponding machine data is
not displayed.
S
If a filter is enabled (checked), the corresponding machine data is displayed.
However, it is necessary to pay attention to the "Index from to" filter.
Note
If the "Index from to" filter is active, note the following point:
If only the "first" index (0) is to be displayed, then the other settings for the over-
ride switch (MD 12000.1: OVR FACTOR_AX_SPEED), for example, will also be
hidden.
S
"Select all" soft key
The checkboxes for the groups are set to active.
The soft key does not affect the following checkboxes:
– Filter active
– Expert mode
– Index from to
– All others
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
S
Inactive: All the machine data is displayed.
S
Active: Test for group filter
S
Inactive: the MD is assigned to Expert mode
=> MDis not displayed
S
Active: the MD is assigned to Expert mode
=> MD is displayed (note index)
S
Inactive: MD is assigned to the group
=> MDis not displayed
S
Active: MD is assigned to the group
=> MD is displayed (note index)
S
Inactive: for MDs that are not assigned to any group
=> MDis not displayed
S
Active: for MDs that are not assigned to any group
=> MD is displayed (note index)
S
Inactive: all subparameters of the MD are displayed
S
Active: only the specified subparameters of the MD
are displayed
© Siemens AG 2006 All Rights Reserved
03/2006
Advertisement
Table of Contents
