Siemens SINUMERIK 840D Simodrive 611 digital Startup Manual page 79

03/2006
1. Machine level
MD 10000: AXCONF_MACHAX_NAME_TAB
Here, an axis name is defined in
MD 10000: AXCONF_MACHAX_NAME_TAB for each machine axis.
Example:
MD 10000
Index
Example for a milling machine: MD10000
AXCONF_MACHAX_NAME_TAB[0] = X1
AXCONF_MACHAX_NAME_TAB[1] = Y1
AXCONF_MACHAX_NAME_TAB[2] = Z1
AXCONF_MACHAX_NAME_TAB[3] = A1
AXCONF_MACHAX_NAME_TAB[4] = C1
2. Channel level
S
S
3. Program level
S
S
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Lathe
with X, Z, C axis/spindle
X1 Z1 C1
0 1 2
MD 20070: AXCONF_MACHAX_USED[0...7]
The channel-specific MDs are used to assign the machine axes to
a geometry channel.
Lathe
1 2 3
MD 20080: AXCONF_CHANAX_NAME_TAB[0...7]
The MD defines the names of the axes on the channel. Enter the names of
the geometry and additional axes here.
X Z C
MD 20060: AXCONF_GEOAX_NAME_TAB[0...2]
The MD defines the names that are used in the part programs for the geo-
metry axes (machine-independent workpiece axes).
X Y* Z
* For a transformation e.g. TRANSMIT
the 2nd geometry coordinates must also
be given a name (e.g. "Y")
MD 20050: AXCONF_GEOAX_ASSIGN_TAB[0...2]
Defines the allocation of geometry axes to the axes of the channel
(MD20070) without transformation. For allocation while transformation is
active, see:
6 Programming the control
6.9 Axes and spindles
Milling machine
4 axes+spindles/C axis
X1 Y1
3 4 0 1
Milling machine
0 0 1 2
X Y
X Y
Z1 A1 C1
2 3 4
3 4 5
Z A C
Z
6-79
6