Table of Contents
Advertisement
03/2006
Display
The soft key can be accessed from Fig. 10-14. This gives the following screen:
bit graph ...
soft key
Fig. 10-17 Bit graph – example of trace 1
The signals from up to 10 tracks are represented over the duration of the mea-
suring interval. Vertical soft keys can be used to change the view as required or
to print out the bit graph.
Hide
Shows/hides the signal identifiers overlaid over the signal curve. The function is
identifiers
also available in the extended view. See the "Zoom X" soft key.
soft key
Colors soft key
Opens a submenu from which you can select:
S
S
S
S
S
under "Color scheme", The color palette corresponding to your selection is dis-
played. You can then select different colors for each track.
There is a common color available for all signal identifiers.
Procedure:
1. Use Cursor Up/Down Track/Word select "Identifier", palette receives focus
2. Use Cursor Up/Down/Right/Left select color
3. Select Input/Return to accept.
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
User
VGA
VGA positive
Monochrome
Monochrome positive
10 Drive Optimization
10.7 Trace function
10-209
10
Advertisement
Table of Contents
