Table of Contents
Advertisement
11 Data Back-Up
11.5 Data back-up via machine data
Downloading
archive data
Standard system
start-up
Archiving by area
11-234
Note
For the PLC, data back-up can be executed with the SIMATIC tools HiGraph.
Note filter setting for SDBs!
Reference material:
These tools are useful in ensuring portability of the PLC programs.
To read in a complete configuration, a general reset of the control must be
carried out first.
1. Set the protection level to "User" (Password CUSTOMER)
2. Connect the PG/PC to port X6 on the PCU.
3. On the HMI, select the "Services" area. Continue with steps listed under
"Reading in series start-up" or "Reading in area-specific archive data".
4. Select the interface configuration "V24-PG/PC" as described above
(punched tape format unchecked).
5. Start the PCIN data transfer program on the PG/PC.
Press the "Data out" soft key to start transferring the NCK standard system
start-up file to be transferred to the control.
On the HMI, select the "Services" area,
press the "Data in" soft key and
press the "Start" soft key to start reading.
Acknowledge any input prompts.
6. Carry out an NCK reset and general reset of the PLC, then repeat the proce-
dure with the PLC standard system start-up file.
7. Carry out another NCK reset. The control will start up with the new data.
Note
The NCK series start-up file must always be imported before the PLC series
start-up file.
4. Select the interface configuration "V24-PG/PC" as described above and set
"punched tape format" (unless for drive data).
– Start the PCIN data transmission program on the PG/PC. Select the
archive file to be read into control under "Data Out" for transmission.
– On the HMI, select the "Services" area,
press the "Data in" soft key and
press the "Start" soft key to start reading. The data is detected automati-
cally and downloaded accordingly.
Acknowledge any input prompts.
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
/S7HT/ Manual, Application of Tools
© Siemens AG 2006 All Rights Reserved
03/2006
Advertisement
Table of Contents
