Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 3
Operational Procedures
Unloading Paper
1. Press ON LINE to place the printer in offline mode, and open
the printer cover.
2. For cabinet models, open the cabinet rear door. For models
with the power stacker installed, press the STACKER UP key
on the rear control panel.
3. Tear off the paper at the perforation.
4. Allow the paper to fall to the back of the printer and into the
paper stacking area.
5. For pedestal models, remove the stacked paper from the paper
tray.
6. For cabinet models, remove the stacked paper from the rear
cabinet floor. For cabinet models with the power stacker
installed, remove the paper from the wire paper tent and press
the STACKER DOWN key to lower the stacker mechanism.
Close the cabinet rear door.
70