Printronix P5005B User Manual page 134

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
Coax/Twinax Emulation
•
Enable. The operator panel settings override the host
commands.
Format Control
Enables the printer to reflect the same spacing as CTPC model
printers after absolute and relative move commands are executed.
•
Disable. Reflects distance, generated by the IGP/VGL feature,
IGP/PGL feature, and Hex Transparent control code sequence,
in the new position (after horizontal and vertical tabs are
executed).
•
Enable. Does not reflect distance, generated by the IGP/VGL
feature, IGP/PGL feature, and Hex Transparent control code
sequence, in the new position (after horizontal and vertical tabs
are executed).
Max. Print Width
Set the maximum print width at either 13.2 inches or the maximum
width of the printer.
Buffer Print
•
Disable. The printer will print normally.
•
Enable. The printer prints the EBCDIC data and control codes
received from the host as hex values. Refer to page 189 for
information on how to obtain a hex code printout.
NOTE: Use of this parameter may alter print attributes set by the
134
host computer. A power cycle may be required after
changing Buffer Print from enable to disable.